您当前的位置:电源认证 > 新闻资讯 >

印度执行BIS电池新标准IS16046:2015

作者:亿博检测 点击: 次 关键字:印度电池标准,IS160416:2005

        1. 标准IS 16046:2012/IEC62133:2002 已更新为IS 16046:2015/IEC62133:2012 含碱性或其他非酸性电解质的便携式密封二次电芯和电池组的安全性要求。
  1. IS 16046:2012/IEC 62133: 2002 has been revised as IS 16046:2015/ IEC 62133: 2012 ‘Secondary cells and batteries containing alkaline or other non-acid electrolytes -Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications’.
  2. 依据2015 9 17 日颁布的公文,新版标准IS 16046:2015/IEC62133:2012 已于当天建立,新版与旧版标准在2016 9 16 日前可以同时运行,2016916日后旧版本标准IS16046:2012/IEC62133:2002作废。
  2. As per Gazette notification dated 17 Sept 2015, IS 16046:2015 /IEC 62133: 2012 was established on 17 Sept 2015. The concurrent running of IS 16046:2012/IEC 62133: 2002 and IS 16046:2015 / IEC 62133: 2012 is permitted till 16 Sept 2016. AccordinglyIS 16046:2012/IEC 62133: 2002 shall stand cancelled after 16 Sept 2016. 
  3. 相比旧版标准,新版标准主要包含了以下较为重要的变更:
  (1) 修订了电池组使用的电芯装配要求(Cl. 5.6.1)
  (2) 增加了锂电池的设计建议(Cl. 5.6.2)
  (3) 对镍电池和锂电池的测试要求加以区分( Cl. 6)
  (4) 增加了对锂电池的特定要求与测试(Cl.8)
  (5) 增加了二次锂电芯可安全使用的充电条件(Annex A)
  (6) 准入韩国、日本、瑞士和法国的特定测试要求- 设计评估- 强制内部短路测试(电芯)(Cl.8.3.9)
  3.The erevised edition IS 16046:2015/IEC 62133: 2012 includes the following significant technical changes with respect to the previous edition IS 16046:2012/IEC 62133: 2002:
  · update of assembly of cells into batteries (5.6.1)
  · addition of design recommendations for lithium system only (5.6.2)
  · separation of nickel systems and lithium systems (Clause 6)
  · addition of specific requirements and tests for lithium system(Clause 8) 
  · addition of charging of secondary lithium-ion cells for safe use (Annex A).
  · Country specific test -Design evaluation – Forced internal short circuit (cells) (Clause 8.3.9) applies to Korea, Japan, Switzerland and France. 
  4. 附录-1 列明了新旧标准中针对变更较大的测试方法/步骤的差异对比。
  4.The major changes where variations in test methods/procedures are effected are given at Annex – 1.
  5. 考虑到以上变更,已注册的制造商需执行以下增加和变更的测试项目。
  5.Considering the above changes, the following additional/modified tests are to be conducted for changeover for the existing registered manufacturers:  
  (1)镍系电池
  镍系电池
  
  (2)锂系电池
  
  镍系电池测试项目
  
  6. 更换流程
  (1) 全新注册申请或报备申请现可依据新版标准提交。
  
  (2) 全新注册申请或报备申请也可同时采用旧版标准,但该测试报告原件须在2016 816 日当天或之前提交给BIS(旧版标准废止前1 个月)。即使该测试报告是在20168 16 日之前出具,如报告原件是在2016 8 16 日后提交,该报告将不被BIS接受。
  
  (3) 2016 8 16 日后,只允许采用新版标准的全新注册或报备注册申请才可以被接受。
  
  (4) 已提交BIS 的新注册或报备的案子依旧以旧版标准进行审核。
  
  (5) 所有采用旧版标准的注册申请须提供一份声明(附录-2),保证申请单位将于2016 9 16 日之前进行新标准更换。
  
  (6) 对所有采用旧版标准的申请,如制造商未能赶在2016 9 16 日之前注册成功,则依据标准和规定审核,由BIS决定申请被终止或拒收。
  
  (7) 所有已注册制造商须在2016 9 16 日之前更换新标准。当天之后,所有已注册制造商将不允许采用旧版标准操作。如制造商未能赶在2016 9 16 日之前更换新标准,其注册资格将于旧版标准废除之日即2016 9 18 日当天被取消。
  
  (8) 已注册制造商须提交一份声明(附录-3),保证该产品的所有型号(包括主型号和系列型号)符合新版标准IS 16046:2015/IEC62133:2012, 且只有符合新版标准的产品才能标识“Standard Mark Declaration-Conforming to IS16046:2015/IEC 62133:2012 ,采用旧标准的产品则不能标识该BIS Standard Mark和声明。
  
  (9) 标准更换的申请方式是提交变更报告(包括注册范围内的所有主型号),该报告须由BIS 认可实验室出具的,且报告符合附录-1中的增加和变更的测试要求。
  
  (10) BIS 将依据以下要点对标准更换的申请进行审核:
  A. 变更报告(所有主型号含已在注册范围的,该报告须由BIS 认可实验室出具的,且报告符合附录-1中的增加和变更的测试要求。)
  B. 以上所述的必要声明。
  C. 针对符合新标准的产品和型号,BIS 将颁发标准更换确认函。
  D. 如已注册制造商未能适时进行标准更换,将依据规定取消相应的注册资格。
  6. Procedure for Change over
  a) Applications/Inclusions can now be submitted as per the new version.
  b) Applications/Inclusions can also be submitted as per the old version. However, in such cases hardcopy of the application/inclusion shallbe submitted in BIS on or before 16 August 2016 (one month prior to the date of cancellation of old version). Even if the test report has been issued by the Laboratory prior to 16 August 2016, such cases shallnot be accepted if the hardcopy of the application/inclusion is received after 16 August 2016.
  c) After 16 August 2016 Applications/Inclusions as per the new version onlywill be accepted.
  d) Applications/inclusions already submitted in BIS will be processed as per old version.
  e) All Applicants whose Applications are as per old version shall give an undertaking (Format at Annex 2) that they shall switchover to the new version before 16 Sept 2016.
  f) For Applications/Inclusions submitted as per the old version, if the manufacturer fails to get Registration before 16 Sept 2016, such application(s)/inclusion(s) shall be processed for closure/rejection as per norms.
  g) All existing Registered manufacturers shall also switchover to the new version on or before 16 Sept 2016. No Registered manufacturer shall be under operation as per the old version after 16 Sept 2016. In case any manufacturer fails to switch over to the revised version before 16 Sept 2016, his Registration shall be deemed to have been cancelled from the date of withdrawal of the old Indian Standard i.e after 16 Sept 2016.
  h) Registered manufacturers shall also submit an undertaking (Format at Annex 3) that all models of the product (base and series models) conforms to IS 16046:2015/IEC 62133: 2012 and only those products found conforming to the revised standard shall be marked with the Standard Mark/ the words ‘Self Declaration-Conforming to IS 16046:2015/IEC 62133: 2012’ along with Registration number and products as per old version of Standard shall not be marked.
  i) All the cases for changeover shall be processed based on amendment test report (for all the base models included in the Scope of Registration) from any BIS approved lab indicating conformity to the additional/modified requirements mentioned at Annex -1.
  j) The cases for change over to revised standard shall be processed by BIS based on the following :
  i. Amendment test report (for all the base models included in the Scope of Registration) from any BIS approved lab indicating conformity to the additional/modified requirements mentioned at Annex -1
  ii. Necessary Undertaking as mentioned above.
  iii. Letter regarding changeover to the revised standard shall be issued by BIS indicating the Product and Model Numbers found conforming to the revised standard.
  iv. In case the Registered manufacturer fails to take appropriate actions for changeover, such cases shall be processed for cancellation as per norms. 
  7. 综上所述,所有已注册制造商和申请单位须及时进行标准更换。
  7.All Registered manufacturers and Applicants shall take timelyactions for changeover as per the above guidelines.

本文连接:http://www.mepscert.cn/news/638.html




亿博检测微信号

【 打印本页 】  【 点击返回 】

授权书

(深圳宝安分公司) 电话:86-0755-3312 6629 | 传真:86-0755-2263 9141 | Email:ebo@ebotek.cn

(武汉分公司) 电话:86-027-8760 9413 | 传真:86-027-8818 0138 | Email:ebo@ebotek.cn

(东莞分公司) 电话:(0)136 8617 3586 | 传真:86-0769-8730 9330 | Email:ebo@ebotek.cn

(上海分公司) 电话:86-021-5109 8960 | 传真:86-021-5109 8960 | Email:ebo@ebotek.cn

宝安地址:中国深圳市宝安82区新安六路勤业商务中心A栋一楼112-114(518102)

武汉地址:武汉光谷鲁磨路联峰大厦11楼7-1 (430000)

Copyright © EBO 亿博检测 版权所有 粤ICP备09054657号

亿博微信二维码
在线客服代码
QQ在线咨询
咨询电话
0755-33126629
技术支持
13530223279